Flush Door

V.I. flush doors are modern, elegant and ready to use than can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. Obviously, the doors are made with chemically treated seasoned hardwood battens and frames.

The cross bands veneers are uniformly dried to the requisite moisture content. They are then bonded with special quality phenol formaldehyde synthetic resin as per the guidelines of IS:2202. V.I. Flush Doors are treated for total termite and borer protection. The flush doors are manufacture under strict quality control conditions that exceed the ISI specifications. The doors can be manufactured according to customized sizes too.

Standard Thicknesses 30mm, 32mm, 35mm, 38mm, and 40mm.


FLUSH DOOR IS 2202 (PART I) : 1999

Tests ISI Requirement Observed Value

Length, Width - + 5 mm

Thickness - + 1 mm

Within limits

Squareness Deviation not more than 1 mm on a length of 500 mm Deviation below 1 mm
General Flatness Twist, cupping, warping not to exceed 6 mm -
Local Planeness Depth of deviation at any point to be less than 0.5 mm Within limits
Impact Indentation Test Depth of Indentation not to exceed 0.2 mm Within limits
Edge Loading Test Deflection of edge with max. To be less than 5 mm Within limits
Shock Resistance Test No visible defect after test No visible defects
Buckling Test

Initial deflection - < 50mm

Residual deflection - < 5mm

Within limits
Slamming Test No visible damage after test No visible damage
Misuse Test No deformation after test No deformation
Varying Humidity Test No visible wrapping, twisting or de-lamination No such defets abserved
End Immersion Test No de-lemination at the end No de- lemination
Knife Test Minimum pass standard Excellent
Glue Adhesion Test No de-lamination No de-lamination
Screw Withdraw Test Load to withdraw screw to be more than 1000 N Load - > 1000 N